Due to our wide product range and rich experiences in this industry, we are confident to provide our customers flexible and diversified services.
- Close up of shear pin which will shear in half if the implement is subject to sufficient resistance Shear pin: the shear pin shaft I use for the chipper/shredder. The driven end yoke is actually two pieces with a shear pin or bolt that holds the two pieces as one during operation. Should the equipment encounter a sudden stop the pin will take the shock and “shear off” preventing any driveline damage. Applicable Industries:
With groove gap
longest 4 meters without welding
Reply in 12 hours at any time
Oil+PE bag+ Wooden case
- Teeth Type:
Spur teeth or Helical teeth
Steel, Brass, Nylon, POM etc.
- Supply Ability:
- 5000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- Antirust oil + PE bag + Wooden case
- Ningbo, Shanghai or as request
Quantity(Bags) 1 – 200 201 – 500 501 – 2000 >2000 Est. Time(days) 20 30 45 To be negotiated
You benefit from our comprehensive knowledge of the interaction between all the components in the drive train. For precise sizing and design of the entire drive train, we use our innovative EPG ® 5 design software.
wenling junhong High precision aluminum gear rack
Our spur and helical gear racks are welcomed by many customers for its stable high quality and competitive price.
The producing character of JH gear racks.
1. Gear rack length: the longest is 4000mm without joint. It can be jointed to any length.
2. Material: steel C45, stainless steel, high strength steel, copper, aluminium, nylon, plastic, POM etc;
3. Module: 0.3-8 (pitch from 0.942-25.12mm, DP 3.175-85);
4. Surface: zinc (galvanized), black, chromium plating, nickel plating, quenching and tempering etc.
5. Quality: stable and high: accumulated tolerance 0.1mm per 1000mm for normal quality;
Accumulated tolerance 0.02mm per 1000mm for 4 sides ground.
Prices for above quality are very competitive for us.
6. Heat treatment: teeth can be hardened to HRC 43-50.
The quality character of JH gear racks:
1. Stable transmission and low noise;
2. Effectively avoid normal tolerance based on high precision;
3. The surfaces can be ground to grade 7 quality, and teeth can be ground to grade 6 quality;
4. The mounting holes can be made as request;
5. The price is competitive even the quality is high.
CNC gear hobbing machine;
CNC gear shaper;
CNC gear grinding machine;
CNC turning machine;
CNC milling machine.
Y58200 CNC large gear rack shaper,
Y58125A gear rack shaper,
England gear rack shaper
and Russia gear rack shaper,
Steel: C45, Q235, 40Cr, 20CrMnTi, etc.
Stainless steel: 301, 201, 304, 316 etc.
Brass: H59 H68 H80 H90 etc.
Aluminium: 6082, 6061, A380 etc.
Aluminium alloy: 6061, 5083, 7050, etc.
More: PA6, PA66, POM, ABS etc.
Spur teeth gear rack;
Helical teeth gear rack;
Round gear rack;
Tube gear rack;
Curved gear rack.
|Surface||Polishing; Plating; Galvanized; Black; chromium plating, nickel plating; painting etc.|
1. Delivery time: 15-25 days for small order;
30-45 days for big order. (Never delayed till now)
Can be discussed for more urgent order.
2. Response time: usually in 1 hour and in 12 hours even in our holidays.
3. Process feedback: Photos or vedios will be sent for 2-3 times to inform you the producing situation.
4. Test report: The test report can be offered as request.
5. Payment terms: T/T, L/C, D/P, D/A, O/A, M/T, D/D etc.
6. Trade terms: FOB, CFR, CIF, FCA, CPT, CIP, DDU, DDP etc.
A: Yes. Since 2004 only focus on producing high quality gears and racks.
Q: Response time?
A: Reply very soon, and reply in 12 hours at any time.
Our technicians are always togetheOur company is located in XiHu HangZhou Zhejiang Province. Tr with salesmen, so your any questions can be replied very soon.
A: Drawings are more appriated for quotation. Or, please inform us your request, we will make drawings for your check.
Q: Delivery time?
A: 15-25 days for small order (<200 pcs), 30-45 days for large order.
Orders never be delayed, the products will be sent on time as agreement.
A: Middle and high quality is more competitive.
Q: Payment terms?
A: T/T for less than US$20,000 order, and L/C, D/P, D/A, O/A, M/T, D/D etc. for large orders.
Q: Trade terms?
A: FOB, CFR, CIF, FCA, CPT, CIP, DDU, DDP etc. are all accepted.
Hot related products