Coupling Grease

Why Coupling Grease?
Adequate lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is specifically created for gear coupling applications to boost coupling lifestyle even though dramatically decreasing upkeep time. Its higher viscosity base oil and tackifier mix to keep the grease in area and avert separation and it truly is in complete compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced by using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces normally discovered in couplings. Bearing or general purpose greases usually separate and lose effectiveness because of large centrifugal forces on the various components at high rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate from the gear tooth mesh spot resulting in premature coupling failure. Gear Coupling Grease is designed to very resistant to centrifugal separation from the oil and thickener, which allows the lubricant to become utilised for a fairly prolonged time period of time.
One of several strategies to your good results of Gear Coupling Grease could be the variable consistency throughout the doing work cycle from the application. The consistency of our gear coupling grease adjustments with the operating conditions. Operating in the lubricant underneath actual support ailments triggers the grease to come to be semi-fluid, functionally solash lubricating the wear surfaces from the coupling. Since the grease cools, it returns on the unique consistency, thereby preventing leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and five lb. cans.
Characteristics
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in location below large speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated having a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.