DC MOTOR PUMP GROUP 1
General Description
Consisting of the heavy duty DC motor plus the CB1S gear 
pump, this pump motor group is surely an perfect hydraulic electrical power unit for mobile hydraulic equipments, such as motor vehicle carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP 2
Standard Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and examine valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump consists of a four.5″ DC motor plus a CBSR gear pump that has a standard power up/gravity down circuit having a relief valve, a check out valve plus a solenoid release valve.
Exclusive Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all of the hydraulic components concerned ahead of mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~68 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is advised.
four. The power unit should be mounted horizontally.
5. The relief valve strain is preset about 25% higher than the operating stress.
six. Flow manage valve for lowing velocity adjustment is available unpon request.
DC MOTOR PUMP GROUP
Tags