Equipped together with the zero leak bidirectional checking sole-noid valves, this electrical power unit is designed for that operation of two independent circuits. Which are respectively for the most important and subordinate platforms in the double scissors lift. Two cut-off valves are made use of for reducing the machine manually in case of power reduction. If much more independent circuits are required to your application please contact us for availability.
Remark: 1. Please consult our sales engineer for that unique pump displacement, motor power or tank capacity.
two. CSA or UL certified motors can be found upon request.
1. The AC motor is of S3 duty cycle, which may only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean the many hydraulic components concerned before set up of the power unit.
three. Viscosity on the oil shoud be 15~46 cst,along with the oil really should be clean and free of impurities,N46 hydraulic oil is recommended.
four. The energy unit really should be mounted vertically.
5. Check the oil degree inside the tank immediately after the preliminary operating with the electrical power unit.
six. Oil altering is required following the preliminary one hundred operation hours,afterwards the moment every 3000 hrs.