Materials Handling Power UNIT two
This electrical power unit capabilities electrical power up gravity down circuit. Activate the start out solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve with the lowering speed managed through the strain compensated movement control valve. Goods of this series may be broadly utilized in the sector of logistic devices for example fork lift, mini lift table, and so on.
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned prior to mounting the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of charge of impurities, N46 hydraulic oil is advisable .
4. Oil modifying is needed soon after the original a hundred operation hours,afterwards after each 3000 hours.
5. The power unit must be mounted horizontally.
Materials Handling Power UNIT 1
This energy unit is designed for the fork lift marketplace, consisting of extremely efficient gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are controlled through the lever of the guide release valve, that’s outfitted with an electric switch to activate the motor. The lowing pace is managed through the pressure compensated flow management valve.
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned in advance of set up of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and cost-free of impurities, N46 hydraulic oil is advisable .
4. Oil altering is needed after the preliminary 100 operation hours, afterwards the moment each 3000 hrs.
5. The electrical power unit shown is built to be mounted horizontally.