TF Kind Flanges
Model TF flanges are made from exactly the same high-strength cast iron since the S flanges, but are built to accommodate the global common Taper Lock bushing for uncomplicated set up and removal
TF Kind flanges permit for mounting the bushing on the front (hub) side on the flange
TF flanges can be found in sizes six by means of 16 and can be employed with any style of sleeve as pictured on page SF-5
TR Sort Flanges
TR flanges are comparable to your TF style, but let to the Taper Lock Bushing to become mounted and removed from
the reverse or serration side on the flange
The limited torque ratings on the Taper Lock Bushings allow TR flanges to only be utilised with EPDM or Neoprene sleeves
Distinctive bushing sizes are employed, so they’ve got various maximum bores than the TF flanges
Sizes 6 by way of 16 are available
Taper-Lock Bushings
The sector normal taper lock bushing is often a split design permitting a compression fit on the flange on the shaft without set screws
The simple layout helps make the installation and removal uncomplicated though the 8° taper grips tight and delivers superb concentricity
A Reduced level of inventory may be achieved due to the many other energy transmission components that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
will not provide the Taper-Lock Bushings themselves as these are widely offered from other manufacturers